Installa e integra un tablet in macchina: istruzioni e suggerimenti
Per installare e integrare un tablet in macchina, sono necessari solo pochi semplici passaggi. Ti mostriamo esattamente come procedere e ottenere il meglio dal tablet come computer di bordo.
Costruisci il tablet in macchina - passaggio 1: rimuovi la radio
Questa guida si basa sul tablet Google Nexus 7. Inizia rimuovendo la vecchia autoradio dall'auto:
- Ottieni lo strumento di sblocco giusto per la tua radio in modo da poterlo rimuovere.
- Quindi estrarre delicatamente la radio dallo slot e rimuovere tutti i cavi.
- Se la radio è stata rimossa, è ora necessario rimuovere il vecchio coperchio e la console centrale.
- Per fare ciò, allentare le viti necessarie sui lati fino a quando non è possibile rimuovere con attenzione la console centrale.
- Se necessario, troverai anche istruzioni dettagliate su come rimuovere la radio qui.
Costruisci il tablet in macchina - passaggio 2: installa una copertura adatta
Dopo aver rimosso la vecchia autoradio e il coperchio, continuare con l'installazione del nuovo coperchio:
- Innanzitutto, cerca la copertina giusta per la tua auto. È inoltre necessaria una console centrale più grande.
- Assicurati che a entrambi sia assegnato "DIN 2" in modo che il tablet si adatti.
- Quindi installare la consolle centrale appropriata insieme al coperchio della propria auto e serrare tutte le viti.
- Taglia la cornice in modo che si adatti perfettamente al tablet e unisci i due.
- Quindi contrassegnare le posizioni per l'uscita audio e la presa di ricarica ed esporle.
- Per evitare che il tablet scivoli fuori dal supporto, praticare due fori sulla parte superiore e inferiore con un trapano da 4 mm in modo che siano uno di fronte all'altro.
- Posizionare il tablet nella cornice e far passare una fascetta attraverso i fori praticati in precedenza. Stringere, il tablet si trova saldamente nella cornice.
Costruisci il tablet in macchina - Fase 3: prepara l'elettronica
Per queste istruzioni sono necessari i seguenti componenti: mini amplificatore, cavo micro USB OTG Y, presa da 12 volt, adattatore ISO per autoradio, cavo USB Y, cavo per altoparlanti, saldatore, terminale di lucentezza, cavo audio e saldatura.
- Tagliare l'adattatore ISO con un tronchesino. Eseguire anche questo passaggio per la presa da 12 volt.
- Striscia le due estremità e stagnale con una saldatura. Quindi avvitarli insieme nel terminale di lucentezza.
- Ora collega l'amplificatore al terminale di lucentezza usando il cavo dell'altoparlante.
- Ora riporta questi cavi nella console centrale e collega l'adattatore ISO con la spina dell'auto. È possibile avvitare l'amplificatore sotto o accanto alla console centrale.
- Ora collegare la spina USB alla presa da 12 volt e collegare il cavo USB-Y ad essa. È possibile incollare cavi sciolti con nastro adesivo.
- Collegare l'altro lato del cavo USB-Y al tablet in modo che sia alimentato in modo permanente. Prova se tutte le funzioni funzionano senza problemi.
- In tal caso, avvitare il tablet ai lati e fare clic sulla cornice.
- Ora hai la possibilità di utilizzare il tablet come sistema di navigazione o computer di bordo. Serve anche come una buona alternativa carplay.
Leggi nella pagina successiva in che misura è consentito il tablet in macchina.