Posizionare correttamente l'ingranaggio della bicicletta - come funziona
Hai solo bisogno di un cacciavite Phillips per impostare correttamente la tua attrezzatura da bicicletta. In questo modo è possibile impostare gli arresti del deragliatore posteriore. Questi limitano il deragliatore posteriore in modo che la catena non possa cadere.
Impostare correttamente la marcia della bicicletta: arresto superiore
La tua bici ha varie fermate che puoi impostare. Per garantire il corretto funzionamento degli ingranaggi e per evitare cadute gravi, potrebbe essere necessario controllarli e regolarli.
- Premi il deragliatore posteriore per vedere fino a che punto puoi spostarti. Se non è possibile passare alla marcia superiore, ridurre il limite.
- Vite a L: troverai la vite a L accanto alla catena sulla ruota posteriore.
- Riduzione del limite: svitare la vite a L di un quarto o mezzo passo con il cacciavite Phillips. Ruotare il cacciavite in senso antiorario. Nota le rivoluzioni in modo da poter annullare il processo nel caso fosse necessario. Se è possibile passare alla marcia più alta, l'arresto è impostato correttamente.
- Ora devi impostare la fermata inferiore.
Regolazione dell'arresto inferiore
Dopo aver regolato l'arresto superiore, ora è necessario regolare di conseguenza quello inferiore. Ecco come:
- Avvitare completamente la vite di tensione sulla leva del cambio . Questa vite si trova sui due cavi che si trovano sul circuito. Questo rimuoverà la tensione, che ti renderà più facile procedere. Assicurati di essere nell'ultima marcia. Se non è possibile innestare questa marcia, è necessario allentare la vite di conseguenza.
- Vite H: si trova proprio accanto alla vite L.
- Limite di estensione: anche in questo caso, procedere con incrementi di un quarto o mezzo se si ruota la vite H in senso antiorario. Fallo finché la catena non si posiziona sul pignone più piccolo. Tuttavia, se la catena non è ancora ottimale, svitare leggermente la vite.
- Regolazione fine: avviare la catena e spostarla. Se noti che non avanza, devi aumentare nuovamente la tensione. Puoi farlo svitando la vite corrispondente fino a quando puoi passare alla marcia successiva. Se riesci a passare senza problemi, sei pronto.
- Se lo spostamento è troppo presto, dovrai allentare la tensione. Se, d'altra parte, è troppo tardi, è necessario aumentare la tensione, cioè svitare la vite.
Cambio migliore: regolare correttamente il deragliatore
Nel tempo, i cavi del cambio possono allungarsi tirando. Tuttavia, questo non è un problema serio. Puoi risolverlo da solo in pochi passaggi.
- Le istruzioni su come regolare correttamente il deragliatore sono disponibili qui.
- Cavo del cambio di tensione : se si riscontrano problemi con il cambio nelle marce inferiori, è necessario tendere il cavo del cambio sulla leva destra. Puoi farlo ruotando la vite in senso antiorario una volta. Se continua a non funzionare correttamente, puoi ruotarlo di nuovo in senso orario.
- Regolare la vite di regolazione: se la ruota sulla corona anteriore non si sposta più correttamente, è necessario svitare la vite di regolazione sulla leva del cambio sinistra.
- Con circuiti con piccolo-piccolo e grande-grande, la rettifica può avvenire nonostante l'impostazione corretta!
Il prossimo suggerimento pratico ti dirà come pulire correttamente la catena della bici.